From Prototype to First 100 Units: What to Prepare Before You Contact a Manufacturer
"How did you find a manufacturer?" is one of the most common questions first-time hardware builders ask online. The honest answer is that finding a factory is rarely the hardest part. The hard part is showing up with enough clarity that a factory can quote you, sample you and tell you what will go wrong.
This guide covers what to prepare before that first email, so your conversations are shorter and your first small batch is less of a gamble.
Why factories ignore (or overquote) first-time founders
A manufacturer's first question is not "how big is your idea?" It is "what exactly do you want me to build, how many, and how sure are you that the design won't change?" If those answers are vague, you get one of three outcomes: no reply, a quote padded for uncertainty, or a sample that is technically correct and still not what you meant.
Most of that is avoidable with homework you can do on your own, starting with an honest look at which prototype stage you have reached.
The pre-contact checklist
### 1. A one-page product spec
Write down what the product must do, in measurable terms: dimensions, weight, power source and battery life target, operating environment (indoor, outdoor, temperature, water exposure), interfaces, and anything it must never do. Mark each line as must-have or nice-to-have. Factories can design around nice-to-haves; they cannot guess must-haves.
### 2. A design you are willing to freeze
If your prototype still changes every week, you are not ready for a production quote. You can still ask for advice, but say so. Note which parts are stable (for example, the PCB) and which are still moving (for example, the enclosure).
### 3. A bill of materials (BOM)
List every component with part numbers, quantities and an acceptable alternative where you have one. Flag parts that are single-source, long lead time, or end-of-life. This is often where small runs get stuck.
### 4. Files in a usable format
For electronics: schematic, PCB layout files and Gerbers. For mechanical parts: STEP files and 2D drawings with critical dimensions and tolerances. A photo of a 3D-printed prototype is not a manufacturing file.
### 5. Target quantity and timeline
"100 units now, maybe 1,000 later" is a useful answer. It tells the factory whether you are a sampling customer or a production customer, and it helps them suggest processes that fit (for example, 3D printing or urethane casting instead of injection molding for very small runs).
### 6. A list of open risks
Be upfront about what you have not verified: thermal behavior, drop tests, wireless range, certification needs (FCC, CE, UL, depending on your market). For a US product with a radio, know how FCC modular approval differs from full certification before that conversation. A good partner will help you prioritize; a list shows you have thought about it. If the list is long, a short feasibility check helps you rank it.
Split the problem: you may need more than one supplier
Many first products involve at least two very different suppliers: a PCB fabrication and assembly house, and an enclosure supplier (machining, printing, casting or molding). Some contract manufacturers handle both and final assembly; many small-batch projects end up coordinating them separately. Decide early who owns final assembly and testing, because that is where finger-pointing starts. If you are coordinating suppliers without an engineering background, see our notes on building a tech product as a non-engineer.
How sampling usually works
Expect a few rounds of samples before a batch. Typical steps:
- Quote request with your spec, files, BOM and quantity.
- First samples — check fit, function and finish against your spec, not against your memory of the prototype.
- Revisions — written, numbered, and tied to a specific file version.
- Approved ("golden") sample — the reference unit the batch is compared against.
- Small batch — with an agreed inspection method and acceptance criteria.
Write down every decision and the reason behind it — ideally keep a decision log tied to requirement versions. Three months later, "why did we pick this battery?" matters more than you think.
Common mistakes in the first 100 units
- Changing the design after the golden sample is approved.
- No written acceptance criteria, so "defective" becomes a negotiation.
- Ignoring lead times on a single critical component.
- Treating certification as something to do after the batch.
- Keeping specs, quotes and decisions scattered across chats and email threads.
Where ThingWeave fits
ThingWeave is a private project workspace for you and your AI agent. You keep requirements, sources, research and the reasons behind each choice in one project, so the next conversation — or a different agent — continues from what was already decided instead of starting over. Hardware feasibility is the first scenario we support. See how a project moves from requirements to evidence.
ThingWeave does not manufacture products, find factories on your behalf, or certify designs. It helps you get organized and evidence-backed before you spend money on samples.
We are in pilot, and you can sign up and try it. Start your first project →
FAQ
How do I find a manufacturer for my hardware product?
Prepare a one-page spec, a BOM, manufacturing files and a target quantity first. Then contact suppliers that match your process (PCB assembly, enclosure, final assembly). Clear inputs get faster, more accurate quotes.
What is a golden sample?
The approved reference unit that a production batch is compared against during inspection.
Do I need a frozen design before asking for a quote?
For an accurate production quote, yes. You can still ask for design-for-manufacturing advice earlier — just say the design is not final.
What is MOQ?
Minimum order quantity: the smallest batch a supplier will run. It depends on the process; ask what drives it so you can choose a process that fits a small first run.
Can ThingWeave find a factory for me?
No. ThingWeave helps you organize requirements, research and decisions so you are ready for those conversations.